• attach the wire from pin 1 (transmit audio) on
the DB-9 to the microphone connector’s input
pin,
• attach the wire from pin 3 (push-to-talk) on the
DB-9 to the microphone connector’s PTT or
STBY pin,
• (optional) for base or mobile units, attach the
wire from pin 9 (one path to ground) on the
DB-9 to the ground pin on the microphone con-
nector.
Connecting your Transceiver’s Speaker Plug to Your KAM’98
Use the speaker plug cable supplied with the KAM’98 (or an appropriate third
party speaker plug) and the notes taken earlier to do the following wiring to the
DB-9 connector:
Step 1.
Locate the wire that connects to the tip of the external
speaker jack and wire it to pin 5 on the DB-9 (Receive
Audio)
Step 2.
Locate the wire that connects to the sleeve of the exter-
nal speaker jack and wire it to pin 6 on the DB-9
(Ground)
This is all you need to do to wire the speaker plug part of the assembly.
+
Important:
Keep your wiring notes for future reference.
Installing Your KAM’98
Connect Your KAM’98 to Your Transceiver
User’s Guide
60
KAM’98 v 8.3
Summary of Contents for KAM 98
