Getting Started
This chapter gives you important information and examples to get you started
using your multi-mode digital radio station.
We assume you have installed your station and familiarized yourself with the use
of Pacterm 2.0 with your KAM’98, as covered in the chapters on “Installing your
KAM’98” and on the DOS-based terminal program, “Pacterm 2.0.”
Hint: If you are familiar with other communication software, you may use it in-
stead of Pacterm 2.0. In this case, you need to be aware that Kantronics’ docu-
mentation and support services assume the use of Pacterm 2.0, at least for getting
started.
If you have not yet installed your station, including Pacterm 2.0 commu-
nication software, and learned how to use Pacterm 2.0, we suggest that you do so
before continuing with this chapter.
Material covered here includes diagrams, explanations, and mini-tutorials on:
•
the front panel of the KAM’98,
•
beginning a session,
•
Packet operations
•
giving commands and transmitting data,
•
the 22 NEWUSER commands,
•
using selected NEWUSER commands,
•
using the Personal Bulletin Board System that is in your KAM’98,
•
switching to the full command set and back
•
monitoring some HF modes
•
radio teletype signals (RTTY)
•
Pactor signals
•
how to transmit in RTTY and Pactor
•
switching to 1200 baud Packet (and back)
•
monitoring VHF transmissions from nearby packet radio stations
•
connecting to another station and initiating a packet conversation.
KAM’98 v 8.3
97
User’s Guide
Summary of Contents for KAM 98
