This command specifies the channels (streams) which may be available to in-
coming connect requests. For example, if USERS = 5 then an incoming connect
request will connect to the lowest channel A - E, if any of these channels are in
the unconnected state. If none of the 5 channels are available (all of them are
connected), a <DM> packet will be sent back to the requesting station and the
message “*** connect request: (call)” will be output to your terminal, if permit-
ted. If USERS is set to 0 no one will be able to connect to you. If USERS is set
higher than MAXUSERS, the extra is ignored and the message “USERS
LIMITED BY MAXUSERS” will be displayed.
See also:
intface, maxusers, streamsw
USOS {ON | OFF}
default ON
When ON, an unshift to letters case occurs when a space is received in BAUDOT
RTTY. If CODE is set to LCRTTY, a space will shift to lower case.
#
VERSION
immediate
This command causes the KAM’98 to display its current version number along
with the name of the unit.
WEFAX n m (n = 0 - 6000 ) (m = 1, 2 or 4)
immediate
This command permits the reception of Weather Facsimile.
The audio input is sampled n times per second. Each sample becomes one
data-point sent over the serial port to the computer, where it will be used to dis-
play a single pixel on a weather map.
KAM’98 Commands
Command Reference
KAM’98 v 8.3
319
User’s Guide
Summary of Contents for KAM 98
