4.3 Deployment guidelines
The AIS SART will work best when the top section has an unobstructed view of the sky.
If it is not possible to pick a location with a totally unobstructed view of the sky, do your
best to maximize the sky view. The antenna datum marked on the pole section should
be positioned more than one meter above sea level when the AIS SART is deployed.
Tie the securing lanyard to the survival craft to avoid loss of the AIS SART, activate
and deploy the AIS SART.
Method 1
Method 2
Figure 7: deployment
Step 1:
Release buoyant
lanyard secured to top
of the AIS SART
Step 2:
Hang the AIS SART
inside the life raft at a
height of at least 1
meter above water level
Step 1:
Extend the pole up to 1
meter.
Step 2:
Pass the pole through
the life raft canopy port
hole and securer the
pole in vertical position..
Tip.
Tie the lanyard cord between the
AIS SART and the survival craft to
prevent its loss.
Summary of Contents for SafeLink AIS SART2
