Kannad SafeLink AIS SART2, User Manual

Page: 16 / 34

4.4 Mounting outside a canopy life raft
1. Fully extend the telescopic mounting pole:
Remove the rubber cover from the bottom of the mounting pole; allow the pole
sections to drop. Lock each section together by twisting each section.
2. Release the lanyard spool and tether the free end of the lanyard to a securer fixing
point within the survival craft.
3. Insert the AIS SART through the SART deployment port in the survival craft
canopy. Position the bottom of the support pole within the locating pocket. Secure
the pole to the canopy support.
Depending on the type of survival craft, the mounting pole can also be located on the
outboard side of the survival craft at the doorway entrance on the boarding ramp side.
The AIS SART is mounted in the same way except the pole is secured to the buoyancy
support.
4.1 Mounting inside a canopy life raft
The SART should be switched ON and suspended at highest point of the survival craft;
by its top loop using the lanyard provided.
Note: Operating the AIS SART inside a closed Survival Craft or under a canopy may
reduce its performance.
Figure 8: deployment options