4.2 Deactivation Process
1. Hold the TEST button for over 3 seconds to initiate power
off.
2. Keep holding TEST until the ON LED stops flashing:
The AIS SART is then deactivated.
Figure 9: Deactivation
NOTE:
After de-activating, all LEDs shall be off. If any LED is still flashing,
press the TEST button again for more than 3 seconds to de-activate the unit.
Summary of Contents for SafeLink AIS SART2
