14
FINAL ASSEMBLY
Additional paint and exterior trim such as decals
and numbers may be added. Whatever details
you add keep in mind that weight is the enemy of
a high performance aircraft.
KEEP IT LIGHT.
Attach upper wing center section to Cabanes.
The longer bolts are used to attach the front
cabanes. Also attach the wing wire connections
with the bolts.
Attach lower wings, and establish required
length of attachment threaded rod. We allowed
1¼ inch of length and epoxied the threaded rod
into the wing, making sure that the keeper hole
was vertical.
Once the attachments are solid, complete
installation with nut assemblies and cotter pins.
Attach outer panels of top wing, secure by
inserting bolts into the pre-drilled holes on
under-side of wing center section.
Install wing struts. Tighten all strut bolts.
DON’T FORGET THE WING
WIRES IF ENGINE IS
GREATER THEN 50CC
That completes the assembly process.
CONGRATULATIONS
