24
SIPMODE N1
Set the IP address assignment mode.
Available values for
N1:
STATIC
[Static IP mode]
DHCP
[DHCP mode]
SETIP N1 N2 N3
Set the IP address, netmask and gateway address to use when in
Static IP mode.
N1
= X.X.X.X
[X = 0 ~ 255, IP address]
N2
= X.X.X.X
[X = 0 ~ 255, Netmask]
N3
= X.X.X.X
[X = 0 ~ 255, Gateway address]
IPCONFIG
Show the unit’s current IP configuration information.
ETH_FADEFAULT
Reset the unit’s network settings to the factory defaults.
NAME N1 N2
Set a name for the specified preset.
N1
= 1~4
[Preset number]
N2
= {Preset name}
[8 characters maximum]
N1 N2
Route the specified input to one or more outputs.
N1
= A~D
[Output port letter(s)]
N2
= 1~4
[Input port number]
Note: Multiple output letters may be assigned to N1 to route the same
source to more than one output at once. For example, “ABD2” routes input
2 to outputs A, B, and D.
IN1
Route the specified input to all outputs.
N1
= 1~4
[Input port number]
Note: For example, “I3” routes input 3 to all outputs.
RS
Reset the unit’s routing to the factory default.
Summary of Contents for HDMX44A-18G
Page 35: ...35 ...
