17
C H A P T E R
4.
Maintenance
Your Nisca PR5302 Heat Roller Unit is built to require a minimum amount of maintenance.
Nevertheless, there are a few procedures you need to perform on a regular basis or as needed to
ensure maximum performance.
CLEANING
SCHEDULE
CLEANING TOOL
Platen Roller
10,000 prints
Alcohol Swab
Capstan Roller
10,000 prints
Alcohol Swab
Flip/Turn Transport Rollers
10,000 prints
Alcohol Swab
Caution
IMPORTANT!
The surface of the heat rollers can exceed 150º C when in
operation. Turn the power OFF and let the heat rollers cool for at least 30
minutes before cleaning.
Basic Automated Cleaning
A basic automated cleaning is recommended after every ribbon change for the printer. For this
maintenance procedure, you will need a printer Cleaning Card, available from your authorized
reseller. The Cleaning Card contains adhesive backing causing dust particles and debris on the
rollers to adhere to the card. Please only use genuine Nisca Cleaning Cards. Use the following
procedure for performing a basic automated cleaning:
Summary of Contents for TEAMNisca PR5302
Page 2: ......