32
33
EN
Juice Dispenser FSD3000 / FSD3100
© K. & M. Holland GmbH
© K. & M. Holland GmbH
Juice Dispenser FSD3000 / FSD3100
EN
Subject to technical change without prior notice! Version 4.0, 12/2017
Subject to technical change without prior notice! Version 4.0, 12/2017
9.2 Miscellaneous cleaning tasks
1
The refrigerant condenser must be thoroughly cleaned and inspected once a year by an
authorized service firm.
2
Only clear water shall be used to clean the door seal. Never use oil or grease to treat the
door seal. It will cause the seal to become porous over time. We recommend regular
treatment with TALKUM. This will extend service life of the door seal. A you may obtain the
door seal from the Customer Service (see page 37 “Wear and spare parts list”).
3
Should the mixing nozzle become clogged, place your finger on the spout and press the
product dispense button on the display. Some water will squirt out of the nozzle! This will
clean the nozzle.
4
Please be advised that for hygienic reasons, the replacement of the mixing nozzle and
plastic hose is necessary from time to time. We recommend this replacement to take place
during the quarterly service schedule. Any contamination of this equipment will inevitab-
ly falsify the taste of the juice and may cause a health hazard! After the mixing nozzle has
been cleaned thoroughly and disinfected, it can be reused.
Mixing nozzle and replacement parts:
Mixing nozzle:
E86-202-001
O-Ring for the set screw: E45-100-002
Plastic hose:
E62-100-003
O-Ring:
E45-001-049
