12
13
EN
Juice Dispenser FSD3000 / FSD3100
© K. & M. Holland GmbH
© K. & M. Holland GmbH
Juice Dispenser FSD3000 / FSD3100
EN
Subject to technical change without prior notice! Version 4.0, 12/2017
Subject to technical change without prior notice! Version 4.0, 12/2017
2.8 Intended use
The juice dispenser is designed for a specified climate class (N: ambient temperatures of +16
to +32°C, relative humidity up to the max. 75%). The equipment is intended to be used exclu-
sively indoors.
Keep the door open only as long as possible. Otherwise, the temperature inside the refrigera-
ted area will rise. Increased temperatures cause the unnecessary operation of the compressor,
and therefore, increase the power consumption.
Do not cover air intakes and exorcist openings. Otherwise, a sufficient air flow cannot be gua-
ranteed. Furthermore, the power consumption increases, and damage to the components may
be unavoidable.
NOTE
The manufacturer cannot be held liable for damage caused due to non-compliance
with safety information and warnings.
2.9 Personal Protective Equipment
During the assembly/disassembly of the juice dispenser, we recommend the following perso-
nal protective equipment:
n
Safety gloves
n
Safety boots
2.10 Responsibility of the owner
It is the responsibility of the owner to employ only personnel to work with the juice dispenser
who
n
are familiar with the basic regulations pertaining to safety at the workplace and the preventi-
on of industrial accidents
n
have been introduced to all aspects pertaining to working with the juice dispenser
n
have read and understood this Operating Manual
It is the responsibility of the owner to install the juice dispenser in a manner that allows unobs-
tructed access for the care and maintenance of the equipment.
