24
25
EN
Juice Dispenser FSD3000 / FSD3100
© K. & M. Holland GmbH
© K. & M. Holland GmbH
Juice Dispenser FSD3000 / FSD3100
EN
Subject to technical change without prior notice! Version 4.0, 12/2017
Subject to technical change without prior notice! Version 4.0, 12/2017
6. Initial start-up
IMPORTANT
This juice dispenser is exclusively designed for the indoor operation/use and must
not be operated outdoors.
1
Prior to the initial start-up, the inside of the dispenser must be cleaned using a damp cloth
and subsequently dried.
2
Connect the mains power plug of the juice dispenser to a properly installed and earthed
wall socket. The mains voltage must be compatible with the information provided on the
type plate.
3
Activate the equipment switch. The circulation fan operates permanently.
4
Press the green and red key, located inside the door.
5
Ensure the openings for the supply and exhaust air are not obstructed in order to guaran-
tee a smooth function of the juice dispenser.
6.1 Inserting and connecting the Bag-In-Box
CAUTION
Prior to inserting the Bag-In-Box, check its expiry date and inspect the packaging.
1
Place the Bag-In-Box package onto an appropriate work area and open the carton on the
perforated side.
2
Flip back in the tab and pull off the round piece.
3
Pull out the mixing spout and hose until the neck of the cap of the bag is fully exposed.
4
By pushing the tab down, the cap is secured in its position.
5
Open the dispenser’s door and place the Bag-In-Box pack inside.
6
Push the drain hose through the concentrate solenoid valve.
7
Press the mixing spout down until it contacts the mechanical stop on the concentrate inlet.
