ULTRAFLOW® 54 DN15-125
46
Kamstrup A/S · Technical description · 5512-2464_D1_GB_09.2021
6.10
Installation examples (mechanical)
Both MULTICAL® 603 and MULTICAL® 803 (by means of mounting bracket 3026-857) can be mounted directly on
ULTRAFLOW® 54. To optimize the readability of the calculator display, you can benefit from using the supplied angle
bracket 3026-858 for ULTRAFLOW® 54 (type 65-5-XXHX-XXX).
'
At medium temperatures above 90 °C or below the ambient temperature, calculator and Pulse Transmitter/Pulse
Divider must not be mounted on the flow sensor. Instead wall-mounting is recommended.
6.10.1
MULTICAL® 603 mounted on ULTRAFLOW® 54 (Type 65-5-XXHX-XXX)
6.10.1.1
Installation in an ascending pipe
Figure 22. MULTICAL® 603 mounted on ULTRAFLOW® 54 mounted in an ascending pipe.
When installing ULTRAFLOW® in an ascending pipe, it can be of advantage to turn ULTRAFLOW® ±360° around the pipe
axis to optimize the readability of the MULTICAL® display at direct mounting of MULTICAL® on ULTRAFLOW®.
6.10.1.2
Installations at or above eye level
Figure 23. MULTICAL® 603 mounted on ULTRAFLOW® 54 mounted horizontally at or above eye level.
In case of installation above eye level, it can be of advantage to turn ULTRAFLOW® 54 downwards (-45°) to optimize the
readability of the MULTICAL® display at direct mounting of MULTICAL® on ULTRAFLOW®.
'
At installation in humid environments, the plastic housing of ULTRAFLOW® 54 (type 65-5-XXHX-XXX) must be
positioned on the side at horizontal mounting (see