Kamstrup ULTRAFLOW 54 DN15-125 Technical Description Download

Page: 43 / 90

ULTRAFLOW® 54 DN15-125

Kamstrup A/S · Technical description · 5512-2464_D1_GB_09.2021

6.6.3

Recommendations for cooling and combined heat/cooling installations

Cooling and combined heat/cooling installations

Threaded meter housing with q

≤ 2.5 m

Threaded meter housing with q

≥ 3.5 m

and flange meters

(a)

(b)

Figure 18. Recommended orientation of Kamstrup flow sensors around the pipe axis at horizontal mounting

for cooling and combined heat/cooling installations. (a) Threaded meter housings with q

≤

2.5 m

/h.

(b) Threaded meter housings with q

≥

3.5 m

/h and flange meters.

District heating and cooling water must be free of air. Air bubbles will interfere severely with the ultrasound signal. If

there is risk of air, mount all flow sensors like in position (a) with the transducers to the side.

Summary of Contents for ULTRAFLOW 54 DN15-125



























































































Search results

Summary of Contents for ULTRAFLOW 54 DN15-125

Reviews:

Related manuals for ULTRAFLOW 54 DN15-125

Brands by name

Popular brands

Kamstrup ULTRAFLOW 54 DN15-125, Technical Description

Search results

Summary of Contents for ULTRAFLOW 54 DN15-125

Reviews:

Related manuals for ULTRAFLOW 54 DN15-125

Brands by name

Popular brands