Kamstrup MULTICAL 61 Technical Description Download Page 56

Page: 56 / 60

TECHNICAL DESCRIPTION

MULTICAL

5512-622 GB/01.2011/Rev. E1

Approvals

13.1

Type approvals

MULTICAL

61 has been MID approved on the basis of OIML R 49-1:2006 and R 49-2:2006, with FORCE

Certification as notified body. Please contact Kamstrup A/S for further details on type approvals and verification.

13.2

CE-Marking

MULTICAL

61 is CE-marked in accordance with the following directives:

EMC directive

2004/108/EC

LV directive

2006/95/EC (together with Pulse Transmitter)

PE directive

97/23/EF (DN50…DN80) category 1

13.3

Measuring Instrument Directive (MID)

MULTICAL

61 is available with CE-marking according to MID (2004/22/EC). The certificates have the following

numbers:

B-module: DK-0200-MI001-010

D-module: DK-0200-MIQA-001

Summary of Contents for MULTICAL 61





























































Search results

Summary of Contents for MULTICAL 61

Reviews:

Related manuals for MULTICAL 61

Brands by name

Popular brands

Kamstrup MULTICAL 61, Technical Description

Search results

Summary of Contents for MULTICAL 61

Reviews:

Related manuals for MULTICAL 61

Brands by name

Popular brands