Kamstrup MULTICAL 61, Technical Description

Page: 13 / 60

TECHNICAL DESCRIPTION MULTICAL
®
61
5512-622 GB/01.2011/Rev. E1
13
4 Programming
MULTICAL ® 61 can be ordered in countless combinations as required by the customer. First select the required
hardware from the type overview. Then select ”Prog”, ”Config” and ”Data” to suit the application in question.
The “Prog” and “Config” codes are printed on the front label and can be read out via the display or via
METERTOOL. It is only possible to read out “Data” via METERTOOL.
The supplied meter is configured from the factory and ready for use, but can also be changed/reconfigured after
installation. However, this does not apply to type number and CCC-code which cannot be changed unless the
verification seal is broken. This requires that changes must be made by an accredited meter laboratory.
4.1 PROG (A-B-CCC-CCC)
The meter’s legal parameters are determined by the “Prog”, which cannot be changed without breaking the
verification seal. This means that the change must be made by an accredited meter laboratory.
Prog. number A - B - CCC - CCC
3 4
Flow meter position
Internal value
Measuring unit
Internal value
Internal value
Flow sensor coding
(CCC-table)
CCC CCC
4.1.1 >A< and >B<
The A- and B-codes are always 3 and 4, respectively, for MULTICAL ® 61.
4.1.2
>CCC< CONFIGURATION OF FLOW METER TYPE
The
CCC-code
states the calculator’s adaption to a specific flow sensor type to the effect that calculating speed
and display resolution are optimized for the selected flow sensor at the same time as type approval regulations as
to minimum resolution and maximum register overflow are obeyed.
The ”Internal value CCC-code” must be identical with the selected CCC-code.
4.1.3 Standard CCC-codes
Current flow indication (l/h or m³
/
h) is calculated on the basis of volume pulses/10 sec. (See paragraph 8.1)
CCC-table for ULTRAFLOW
®
61
Number of decimals in display
CCC No. Pre-
counter
Flow
factor
m³ l/h
m³
////
h
Imp./l Q
3
[[[[
m³
////
h
]]]]
Type
419
1000 235926 2 0 - 100 1.6 65-2-CDxx-xxx
407
100 235926 3 0 - 100 1.6 65-2-CDxx-xxx
498
600 393210 2 0 - 60 2.5 65-2-CExx-xxx
451
5000 471852 1 0 - 50 4 65-2-CGxx-xxx
436
500 471852 2 0 - 50 4 65-2-CGxx-xxx
437
2500 943704 1 0 - 25 6.3 65-2-CHxx-xxx
438
250 943704 2 0 - 25 6.3 65-2-CHxx-xxx
478
1500 1572840 1 0 - 15 10 65-2-CJxx-xxx
483
150 1572840 2 0 - 15 10 65-2-CJxx-xxx
420
1000 2359260 1 0 - 10 16 65-2-CKxx-xxx
485
100 2359260 2 0 - 10 16 65-2-CKxx-xxx
479
600 3932100 1 0 - 6 25 65-2-CLxx-xxx
458
5000 471852 0 - 2 5 40 65-2-CMxx-xxx
486
500 471852 1 - 2 5 40 65-2-CMxx-xxx