Kamstrup flowIQ 3100 Tecnical Description Download Page 24

Page: 24 / 52

TECHNICAL DESCRIPTION flowIQ® 3100

Kamstrup A/S • Technical Description • 5512

1242_B1_GB • 05.2015

8.7.4

Info codes

The info codes consist of 7 separate text signs (framed in the above sketch), which indicate a special

condition in the meter. The signs flash when active, if not they are OFF.

The individual info codes are described below

Info code - ERROR

This info code is not used.

Info code - LEAK

This info code is activated if the water in

flowIQ® 3100

is never stagnant. Possible untight connections,

running cisterns, untight safety valves in hot water tanks, or other untightnesses will have the result that

the meter registers water flow 24 hours a day.

the water meter

has not registered minimium 1 continuous hour without water flow within the latest 24

hours, this is a sign of a leakage in the water installation.

The alarm automatically disappears after an hou

without flow in the meter.

The sensivity of the leak surveillance can be selected by the customer when submitting the order. The

following options are available:

Leak surveillance

Constant minimum flow alarm is activated at:

OFF

Continuous flow > 0

.5 %

of Q3

Continuous flow > 1

0 % of Q3

Continuous flow > 2

0 % of Q3

Continuous flow > 0

.25 %

of Q3

Continuous flow > 0

1 % of Q3

The utility must be aware that there can be water consumption all the 24 hours in

households with many

residents. This means that there will not be an hour without flow, and

flowIQ® 3100 will set an alarm for

this 24

hour period. Users and water utilities must, therefore, be critical of the leakage alarm.

The leakage alarm is saved with a date stamp in both daily register for 460 days and in monthly register for

36 months. Furthermore, it is saved in the info code register of the latest 50 info code events. Together

with the info code event a time indicator with 7 time intervals, which

indicates how long the info code has

existed, is registered.

The Wireless M

Bus signal includes the LEAK code. If the LEAK code is active or has been active within the

latest 30 days, a time indicator with 7 time intervals will indicate how long the info

code has been active.

Summary of Contents for flowIQ 3100





















































Search results

Summary of Contents for flowIQ 3100

Reviews:

Related manuals for flowIQ 3100

Brands by name

Popular brands

Kamstrup flowIQ 3100, Tecnical Description

Search results

Summary of Contents for flowIQ 3100

Reviews:

Related manuals for flowIQ 3100

Brands by name

Popular brands