flowIQ
®
3100 TECHNICAL DESCRIPTION
27
Kamstrup A/S • Technical Description • 5512
-
1242_B1_GB • 05.2015
The info code RADIO OFF is one info code signal, which either flashes when active, or is inactive to indicate
that the Wireless M
-
Bus radio transmitter is either ‘off’ or ‘on’.
The info code is not included in the Wireless M
-
Bus signal.
8.7.5
Adjustment mark
The symbol ‘A’ and the corresponding figure indicate the number of flow adjustments and legal changes
after factory verification. For further description see paragraph 9.
8
It is possible to reset the legal registers and change the factory programmed flow curve to a limited extent.
The flow adjustment makes it possible to adjust the existing curve at three points. The total adjustment
compared to the factory adjustment cannot
/-
10 %.
As long as no adjustments have been made, both the ‘A’ and the digit are inactive, and Kamstrup
A/S does
not add further adjustment marking to the meter with. After the first adjustment, the ‘A’ is activated and
the digit shows the number of adjustments (1 to 9). Below you see the sequence from adjustments 1 to 9.
