Kamstrup flowIQ 3100 Tecnical Description Download Page 18

Page: 18 / 52

TECHNICAL DESCRIPTION flowIQ® 3100

Kamstrup A/S • Technical Description • 5512

1242_B1_GB • 05.2015

Humidity:

Indoor and outdoor condensing, and water filled wells.

Temperature of media:

0.1…50°C

System pressure (thread meters):

0.3 …16 bar (depending on couplings/gaskets)

System pressure (flange meters):

.3 …25 bar

7.1.3

EMC conditions

flowIQ

® 3100 has been designed for installation in housing and meter wells as well in commercial and

industrial buildings. The meter is CE

marked according to MID on the basis of OIML R49 type test class E1

and E2, as well as the Low Voltage Directive.

7.1.4

Service

When the meter has been mounted in the system, neither welding nor freezing is allowed. Dismount the

meter from the system before starting such work.

In order to facilitate replacement of the meter, closing valves should be mounted on both sides of the

meter

Under normal operating conditions no pipe strainer is required in front of the meter.

7.2

Installation angle

The meter can be mounted at all angles and in all positions. Thus, the meter can be mounted in a usual

horizontal installation. It can be mount

ed vertically in an ascending pipe, it can be mounted at any angle

and it can be mounted with its display pointing downwards, e.g. under a ceiling.

Mounting the meter in a downpipe, you must be aware that the display will in that case be ‘upside down’.

7.3

traight inlet

The meter requires neither straight inlet nor straight outlet to meet the Measuring Instruments Directive

(MID) 2004/22/EC and

OIML R49.

A straight inlet section will only be necessary in case of heavy flow

disturbances before the meter.

7.4

Operating pressure

Recommended
water meter
position

Recommended

water meter
position

Recommended for

well installation.

Air build-up may
occur

The meter

functions optimally,

but the display is

‘upside down’

Summary of Contents for flowIQ 3100





















































Search results

Summary of Contents for flowIQ 3100

Reviews:

Related manuals for flowIQ 3100

Brands by name

Popular brands

Kamstrup flowIQ 3100, Tecnical Description

Search results

Summary of Contents for flowIQ 3100

Reviews:

Related manuals for flowIQ 3100

Brands by name

Popular brands