68
3.26
KaDeck
Versatile air conditioning for offices and administration buildings
Installation and operating instructions
6.18 Functional testing of connected assemblies
The KaController provides the option of checking the function of the
external units connected independently of the software application. The
function of individual assemblies, such as the EC fan, can be directly
activated and checked by means of inputs on the KaController.
The functional checks of the connected assemblies are called up and
performed by the following operating steps:
1. Switch off the KaController by:
pressing the ON/OFF key
or
pressing the navigator for a min.of 5 seconds
or
turning the navigator dial to the left until OFF appears.
2. Call up the Parameter menu by pressing the navigator dial for a
minimum of 10 seconds. The display shows “Para” and then “CODE”
with the value 000 in sequence.
3. Select the password (code) 77 by turning the navigator dial and confirm
by pressing the navigator dial.
4. “L01” is shown on the display and the functional testing of the
connected assemblies can start.
Important:
The individual test steps are called up by pressing the navigator dial. The
default view with an “OFF” on-screen display is shown once the testing has
been completed (L08).
* The control automatically detects the requisite sensors on the analogue inputs AI1 - AI3 using the
DIP switch settings. The respective display (L01-L03) flashes if sensors are faulty or not connected.
Step Input/Output
Display flashes
Display does not flash
L01* Input AI1
Sensor faulty
Sensor OK
L02* Input AI2
Sensor faulty
Sensor OK
L03* Input AI3
Sensor faulty
Sensor OK
L04
Input DI1
Contact open
Contact closed
L05
Input DI2
Contact open
Contact closed
L06
Fault signal input
No alarm
Alarm pending
L07
Fan speed 0 – 10 V
--
Increased actuation
Fan 0 V 10 V
L08
Valve output V1
--
Output V1 activated
L09
Valve output 2
--
Output V2 activated
Observe hardware-related locks during functional testing (refer to
the respective wiring diagram!)
Summary of Contents for KaDeck
Page 95: ......
