84
3.26
KaDeck
Versatile air conditioning for offices and administration buildings
Installation and operating instructions
8.3.3 Extended cleaning work for the wet cooling model
In addition to the steps described under point 8.3.2, the wet cooling
version also needs the condensation tray to be cleaned, and the
condensation pump, float switch and drain need to be checked
(including the on-site condensation drain).
Drain off any residual water to dismantle the condensation tray.
Have a receptacle ready to catch any water. Remove the float switch
by removing the cable tie and allow all water to drain into the
container.
Water will flow from the condensation tray as well as from the float
switch. Clean the float switch during every service. To do so, open the
cover of the float switch and flush all parts with water.
Pull gently on the tray until it comes loose from the first catch. Allow
any remaining water to flow out of the tray.
Loosen the tray from the remaining fixings. Make sure that you
hold the tray horizontal to prevent remaining condensation from
escaping.
Use conventional detergent to clean the tray. (Never use aggressive
cleaning agents or detergents, which could attack the ABS tray or
adhesives).
After cleaning, re-fit the condensation tray and pump in reverse
order.
Summary of Contents for KaDeck
Page 95: ......