33
KaDeck
3.26
Versatile air conditioning for offices and administration buildings
Installation and operating instructions
Please read these instructions in full to ensure correct
and proper installation and the correct operation of the
KaController.
Please note the following safety-relevant information:
Disconnect all parts of the system that are being worked on.
Ensure that the system cannot be accidentally re-connected!
Before commencing installation/maintenance work, wait
until the fan has come to a standstill after the unit has been
switched off.
Caution! Pipes, casings and fittings can become very hot or
very cold depending on the operating mode!
Qualified personnel must have undergone training to
provide them with adequate knowledge of the following:
Safety and accident prevention regulations
Guidelines and recognised technical regulations, i.e.
Association of German Electricians (VDE)
DIN and EN standards
Accident prevention regulations VBG, VBG4, VBG9a
DIN VDE 0100, DIN VDE 0105
EN 60730 (Part 1)
Technical wiring regulations (TABs) issued by the regional
electricity providers
Protect the products from any moisture during installation.
Check the application with the manufacturer in case of any
doubt.
Any use other than the use specified above is deemed not
to be correct and proper. The operator of the unit is solely
responsible for any damage arising as a result of this. Intended
use is deemed to include observing the installation instructions
described in these instructions.
Modifications to the unit
Do not undertake any modifications or upgrades on the
KaController or KaDeck without discussing them with the
manufacturer as they can impair the safety and operation of
the unit.
Do not carry out any measures on the unit not described in this
manual. Make sure that on-site systems and cabling are suitable
for connection to the intended system!
Summary of Contents for KaDeck
Page 95: ......
