![background image](http://html1.mh-extra.com/html/kambrook/kfp800/kfp800_instruction-booklet_3344199018.webp)
17
Disassembling the Food
Processor Bowl
1. Remove Spindle 2 from inside the
processing bowl.
2. With one hand on the motor
base and the other holding the
processing bowl handle, turn the
processing bowl handle clockwise
(See Fig. 14). Pull the processing
bowl away from the motor base
to remove.
Fig.14
3. Spindle 1 can be removed from
the processing bowl. To do this,
place the processing bowl upside
down on a flat, dry surface such
as a bench top.
4. Use one hand to hold the
processing bowl handle and
the other hand to turn the tabs
on the base of Spindle 1 in an
anti-clockwise direction to ‘ ’
on Spindle 1.
5. Once loose, lift up Spindle 1 from
the bottom of the processing
bowl to remove.
ALIGN
LOCKED
Overload Protection System
The motor is protected from burning
out by a manual reset cut-out switch.
If the Food Processor is overloaded or
operated continuously for too long,
the motor may overheat and stop.
To operate the Food Processor again,
switch off, unplug and allow to cool
for approximately 30 minutes.
Once the motor has fully cooled, it is
ready for use again.
If overheating is caused by the
processing bowl being overloaded,
remove some of the food and process
in smaller batches.
To avoid overheating, do not operate
the Food Processor continuously
with an excessive load for more than
1 minute.
Some stiff mixtures, such as dough,
may cause the dough blade to rotate
more slowly than normal.
Summary of Contents for KFP800
Page 2: ...Suits all KFP800 models INSTRUCTION BOOKLET...
Page 35: ...34 Notes...
Page 36: ...35 Notes...