Kambrook KFP800, Instruction Booklet

Page: 5 / 36

4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook Power
Drive Direct Food Processor
• Carefully read all instructions before
operating the Kambrook Power Drive Direct
Food Processor for the first time and save for
future reference.
• Remove and safely discard any packaging
material and promotional labels before using
the Food Processor for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this Food Processor.
• Do not place the Food Processor near the
edge of a bench or table during operation.
Ensure the surface is level, clean and free of
water and other substances.
• Do not use the Food Processor on a sink
drain board.
• Do not place the Food Processor on or near
a hot gas or electric burner, or where it could
touch a heated oven.
• Handle the Food Processor and attachments
with care – remember the blades are razor
sharp and should be kept out of the reach of
children.
• Use the blade protector when storing the
processing blade.
• Always ensure the Food Processor is
completely assembled before operating.
• The Food Processor will not operate unless
properly assembled.
• Ensure the control dial is in the ‘OFF’ position
and the Food Processor is switched off at
the power outlet and the power cord is
unplugged before attaching the processing
blade, disc, or lid.
• Always secure the processing bowl onto the
motor base before attaching the processing
blade or disc.
• Ensure the Food Processor lid is securely
locked in place before operating.
• Do not remove the processing bowl from the
motor base whilst in operation.
• Do not push food into the feed chute with
your fingers or other utensils. Always use the
food pusher provided.
• Keep fingers, hands, knives and other utensils
away from moving blades.
• Do not place hands or fingers into the
processing bowl unless the motor, processing
blades and discs have come to a complete
stop. Ensure the Speed Control Dial is in the
‘OFF’ position and the appliance is switched
off at the power outlet and the power cord is
unplugged before removing the lid from the
processing bowl.