Kaltenbach KPS Series, Manual

Page: 90 / 268

KPS SERIES
Operation
M-UK-KPS--06
11/02/03 Page 90 of 138
KALTENBACH
Editing the order of the runs:
-
Press the profile type figure (lower right corner) in the nesting manager
-
Select the run number to be moved
-
Press the button to move the run one position lower
-
Press the button to move the run one position higher
-
Press the button to confirm the new position of the run.
•
Restart after shearing
6
ON
the cycle stops after a shear cut, confirm with RESTART to continue.
OFF
the cycle continues automatically after a shear cut.
•
Out feed table open
6
ON
the outfeed table is always open.
OFF
activate the automatic control of the outfeed table.
•
Outfeed table closed
6
ON
the outfeed table is always closed.
OFF
activate the automatic control of the outfeed table.
•
Pusher out feed table
6
ON
activate the automatic control of the pusher out feed table.
OFF
deactivate the automatic control of the pusher out feed table.