Kaltenbach KPS Series, Manual, Page: 68 / 268

KPS SERIES
Operation
M-UK-KPS--06
11/02/03 Page 68 of 138
KALTENBACH
Enter the X position of the right upper corner
Enter the Y position of the right upper corner
Enter the X position of the right lower corner
Enter the Y position of the right lower corner
•
Arranged
Here the program displays the number of plates witch are already arranged.
•
Height
Here the program displays the height of the selected profile type [mm].
•
Width
Here the program displays the width of the selected profile type [mm].
•
End piece
The end piece from the x-position of the last process.