Kaltenbach KPS Series, Manual

Page: 60 / 268

KPS SERIES
Operation
M-UK-KPS--06
11/02/03 Page 60 of 138
KALTENBACH
4.9 Start Operation
4.9.1
Initializing sequence
NOTICE
Startup the machine without Material!
The material which are still in the machine must be removed before starting the
machine.
After switching and powering on the machine, the punch units, clamping units and the
pusher-carriage will be initialized by the control program. All axis will move to a fixed
cam, after reaching the fixed cam the axis get his reference point.
The control program asks for a confirmation of the correct performing
of the above-mentioned points. Confirmation is given by means of the
button "RESTART" on the operation desk.
Starting order of the initializing sequence:
-
Clamping units are opened
-
Shear unit and punching unit are controlled upwards
-
Flange punch unit initialised
-
Drilling unit initialised
-
Carriage initialised
-
Punching unit initialised
-
Marking unit initialised
-
Shear unit initialised
NOTICE
Correct performing of the initialising sequence must be checked
visually by the operator.