Kaltenbach KPS Series, Manual

Page: 70 / 268

KPS SERIES
Operation
M-UK-KPS--06
11/02/03 Page 70 of 138
KALTENBACH
-
The U-unit is not used.
•
Process
Depending on the options, the machine is able to do several processes. By entering a
[1], [2], [3] [4], [5] or a [6] it is determined which proces will be activated.
- 1 = drilling
- 2 = dot marking
- 3 =
drilling
- 4 = marking text
- 5 = special punching
•
Diameter
In this column the requested drill diameter must be entered. When the output program
is started at the machine, the program will check whether the correct tools diameters
have been placed in the tool change storage places. The TOOL MANAGER gives a
survey which tools are selected. When the machine is not equipped with a automatic
tool change a message "TOOL CHANGE" will be generated.
•
Marking Text
Enter in this field the text you want to mark on the material