Kalkhoff BionX, (Italian) Instruzioni Per L’Uso

Page: 244 / 384

28 | English
0 276 001 XXX | (17.1.11) Bosch ebike Systems
To change the assistance mode , press the
“mode” button 4 until the desired mode is dis-
played in indicator e .
Adjusting the Assistance Level
In the set assistance mode, the assistance level
can be adjusted anytime, even during riding.
Note: For individual versions, it is possible that
the assistance level is pre-set and cannot be
changed.
A maximum of three assistance levels as well as
the assistance shut-off are possible.
To increase the assistance level , press the
button 6 until the desired level is displayed in in-
dicator c .
To decrease the assistance level , press the
button 7 until the desired level is displayed in in-
dicator c .
In assistance level “0” , the drive is switched off.
The eBike can be operated as a normal bicycle
through pedaling.
Switching the Lighting On/Off
Depending on country-specific regulations, two
lighting versions are possible:
– The front light, rear light and display lighting
can be switched on and off at the same time
via the drive HMI.
– Only the display lighting can be switched on
and off; the front and rear light of the eBike
are independent of the drive HMI.
For both versions, the lighting is switched on by
pressing the “light” button 5 . The lighting indi-
cator b appears on the display.
To switch off the lighting , press the “light” but-
ton 5 again; the lighting indicator b goes out.
Speed and Distance Indicators
Note:
Depending on country-specific version,
distance and speed can either be displayed in
“km” and “km/h” or in “mi” and “mph” . Adjust-
ment of the drive HMI and the selection of the
display possibilities for the km and mile version
are identical.
The
speed indication a always displays the cur-
rent speed.
The following indications are available in
multi-
function indicator d :
Total distance “odo” : Indi-
cates the total distance cov-
ered with the eBike
Trip distance
“trip” : Dis-
tance covered since the last
reset
Average speed
“avg” : Aver-
age speed achieved since
the last reset
Range
“range” : Estimated
range of the available bat-
tery charge (for constant conditions such as
assistance mode, assistance level, route profile
etc.)
To
switch within the multi-function indicator ,
press the “info/reset” button 3 until the desired
function is displayed.
To
reset the trip distance “trip” and the average
speed “avg” , switch to one of both indications
and then press the “info/reset” button 3 until
the indication is reset to zero.
“SPORT” : Powerful assistance for
sportive riding off road as well as
for urban traffic
“SPEED” : Maximum assistance,
supporting highest cadence for
sportive riding
Assistance
degree* at:
Assistance level
Assistance mode “1” “2” “3”
“ECO” 30 % 60 % 90 %
“TOUR” 50 % 100 % 160 %
“SPORT” 55 % 110 % 200 %
“SPEED” 60 % 130 % 250 %
* The assistance degree can vary for individual versions.
OBJ_BUCH-1407-001.book Page 28 Monday, January 17, 2011 2:58 PM