Kalfire E Series, Installation And Operation Manual, Page: 19 / 32

19

Temperatures around the heat outlet can rise up
to 120°C. Therefore, this area must never be
covered.

Temperatures around the steel frame can reach
80°C. Materials used in this area must be suitable
for these temperatures.

Do not block any ventilation openings of the
product.

When placing finishing materials around the sides
of the fireplace, a minimum distance of about 5
mm should be maintained between the potential
finishing materials and the fireplace for heat
transfer and expansion.

The withal frame will expand when heated by the
heating element in the fireplace. If the finishing
material is too tight against the guides, it could
lead to heat transfer and material stress, which
may cause cracks or damage to the finishing
material or the fireplace.

Kalfire is not responsible for damage or injuries
resulting from the use of unsuitable materials or
installation.
4.5.1 Installatieinstructies
For the installation of the fireplace, follow the
instructions in section 4.2.2
ATTENTION!
If a LAN cable/network cable (not included) is desired,
place the fireplace on the furniture where it will be
situated and connect it to the back of the product
before hanging the product on the wall anchors.