Kalfire E Series, Installation And Operation Manual, Page: 16 / 32

16
2. (Optional) If a hidden wall socket is desired, the
following space in the Design Frame can be used
for this purpose.
3. Once marked, install the wall anchors by referring
to the standard installation conditions for each
wall type.
IMPORTANT!
If you are not sure about your wall type, please ask an
expert or your local DIY store for assistance.
A. Dry wall, masonry, or concrete wall
Use provided plug UX8 and 4x DIN 571 6 X 60
hexagon head wood screw with M6 DIN 125-1A plain
washer
4. Drill a hole with drill size 8 mm or 5/16 inch and
insert plugs.
Use 4x DIN 571 6 X 60 hexagon head wood screw to
mount the brackets to the wall.
B. Dry wall with wooden frame or wooden wall:
Use 4x DIN 571 6 X 60 Hexagon head wood screw
4.
Drill these directly into wooden frame to fix the
brackets in place.
4.4.2
Installing the LED Strip on the Design
Frame (Optional)
If you did not opt for the LED strip option with the
Design frame, please proceed to step 4. If an LED strip
was selected, it must be mounted on the Design frame
before continuing with the installation.
 Place the Design frame with its back side flat on
cardboard or a carpet.