Kalfire E Series, Installation And Operation Manual, Page: 14 / 32

14
4.3.2 Installing the Media Wall
Use the provided drilling template to mark out the
position of the Media Wall.
1.
First place the sides of the drilling template and
align them with the sides of the already installed
product.
2. Then apply the top part and align to the correct
height for your model as indicated on the drilling
template.
3. Now mark the holes for the Media Wall brackets.
4. Once marked, install the provided wall brackets to
mount the Media Wall by referring to the
standard installation conditions for each wall type.
See paragraph 4.3.1.
A. Dry wall, masonry, or concrete wall
Use provided plug UX8 and 4x DIN 571 6 X 60
hexagon head wood screw with M6 DIN 125-1A plain
washer.
5. Drill hole with drillsize 8mm or 5/16 Inch and
insert plugs.
Use 4x DIN 571 6 X 60 hexagon head wood screw to
mount Brackets to wall.
B. Dry wall with wooden frame or wooden wall:
Use 4x DIN 571 6 X 60 Hexagon head wood screw
5.
Drill directly into wooden frame Use screw X to
mount brackets directly to wall.
6.
Lift the Media Wall and place on top of the
installed brackets. The product is now in place.
4.3.3 Installing the fireplace
IMPORTANT!
This fireplace must be plugged into a 230~240V, 50Hz,
11Amp electric supply with the provided power cord.
This appliance must be grounded.
1. Connect unit to power. Insert the power cable into
the plug on the right side of the product. Then
plug the cable into the socket.