33
EN
13.5. Detecting the sensors.
Sensors not detected:
- Move at least 10 metres from other potential users of heart rate monitor belts or accelerometers.
- Bring the sensors close to the watch.
- Activate the accelerometer (shake it).
- Position the moistened belt correctly (
section 13.1. Abnormal heart rate
).
- Restart the pairing (
section 12.5.1. Pairing the sensors
).
- Replace the sensor batteries.
- Check that the sensor is activated in the watch’s settings (
section 12.5.4. Activating the sensors
).
13.6. Inability to configure lap information.
The time is in your list of indicators by default. Press
until it appears on the 2
nd
or 3
rd
row of your
display. If this indicator is no longer in your list, refer to
section 12.4. Your display
to put it back.
13.7. Inability to configure lap information.
The lap information cannot be less than 30 secs or 0.1 km. If a lower value is confirmed, the
symbol will appear and the entered value will flash for 3 seconds before you can enter a new value.
13.8. Restore the factory settings.
Restoring the factory settings is done in the SETTINGS / default settings mode.
