2
2
Safety
2.1
CE-marking
The appliance has been approved according to the CE standard EN
13229-A2.
Every appliance that leaves the factory has been tested for functionality
according to the Kal-fire quality standards.
The national Building Regulations, Fire Regulations and the
municipal regulations apply to this product.
2.2
Safety instructions installer
•
An authorised installer will connect the Heat Pure in
compliance with the national and/or local applicable
regulations.
•
Check if the Heat Pure functions correctly immediately after
the installation.
•
Take the necessary preventive measures, by using non
combustible material, in order to prevent overheating of
floor, boards or walls close to the Heat Pure.
2. Safety
The appliance has been approved according to the CE standard EN-
Every appliance that leaves the factory has been tested for functionality
al Building Regulations, Fire Regulations and the
An authorised installer will connect the Heat Pure in
compliance with the national and/or local applicable
Check if the Heat Pure functions correctly immediately after
Take the necessary preventive measures, by using non-
combustible material, in order to prevent overheating of
