3. Mounting and installation
27
Heat Pure 60, 71, 85
The Heat Pure has a removable baffle plate.
This baffle plate is situated above the smoke
hood just below the heat exchanger. With
the larger Heat Pure Models this plate
consists of several parts.
The baffle plate ensures an optimal
combustion.
In the following situations, it may be
necessary to remove the baffle plate or
decrease it’s the size.
•
Smoke return when the Heat Pure starts
•
Condensation in the flue duct
If necessary, you can adjust the baffle plate
as follows:
1.
Remove the baffle plate and see if this
solves the problem. If the problem still
occurs, then something else is the cause.
If removing the plate solves the problem,
proceed with the next step.
2.
Use a saw or knife to cut away a strip of 1 cm wide at the front of
the baffle plate. Do not remove too much. The baffle plate must
still be able to rest on the bracket. A maximum of 6 cm can be
removed from the baffle plate.
All baffle plates must be removed if the
Heat Pure
85
is used as an open fire place
Baffle plate
3. Mounting and installation
Use a saw or knife to cut away a strip of 1 cm wide at the front of
baffle plate must
still be able to rest on the bracket. A maximum of 6 cm can be
Heat Pure 60, 71 or
Baffle plate
