3. Mounting and installation
20
3.6.1
Rear connection
The Heat Pure is delivered as standard, with the flue exit connection on
the top of the appliance. This connection can be converted to create a
flue exit connection at the rear of the appliance.
Figure 1 Converting a top flue exit into a rear flue exit (6 steps)
1.
Demount the upper part of the convection casing.
2.
The connection piece is now visible and the four bolts can be
unscrewed.
3.
Turn the connecting piece 180°.
4.
Press the punched cover out of the convection casing; this cover is
used to close off the upper connection.
5.
Mount the upper part back onto the Heat Pure.
6.
Place the cover on the opening on the top.
7.
Continue with the connection of the Heat Pure.
1
2
3
4
5
6
