Kaisai KVX-150 RHQ, Owner'S Manual

Page: 85 / 180

85
English
ATTENTION!: in case of units supplied
without KVX RHQ you are recommen-
ded to activate the remote alarm that
signals the filters replacement
C3C3
ENTER
FirE
boIL ENTER
ENTER
FcFc
ENTER
AlrN
COnS
ENTER
ENTER
• DRY CONTACT C3-C3
CONFIGURATION
IMPORTANT!: The function is available by
connecting the dry contact C3-C3 on the power
board and is active only if JUMPER MC4 is open.
The dry input contact (NC
*
) C3-C3 enables two
types of operation that can be activated by means
of the on-board display:
• Fireplace “
FirE
” function (default)
• Boiler “
bOIL
” function
From the main menu, access the “
TECH
” menu
and press the “ + ” key to display the “
C3C3
” menu.
Then press “Enter” to confirm.
Using the “
+
” key, choose either the
FirE
or
bOIL
function.
Confirm the selected function with the “Enter” key.
• DRY CONTACT FC-FC
CONFIGURATION
IMPORTANT!: The function is available by
connecting contact FC-FC on the power board.
Contact FC-FC (230V output) enables two types
of operation that can be activated from the on-
board display:
• “
ALrN
” function (default)
Remote alarm status signal
• “
ConS
” function 230V enabling signal for
synchronisation with external units.
From the main menu, access the “
TECH
” menu
and press the “ + ” key to display the “
FCFC
” menu.
Then press “Enter” to confirm.
Using the “
+
” key, choose either the
ALrN
or
ConS
function.
Confirm the selected function with the “Enter” key.
NO*= normally open contact
NC*= normally closed contact