7.2 Instructions to be observed before commissioning
Incorrect or improper commissioning can cause injury to persons and damage to the machine.
➤ Commissioning may be carried out only by authorised installation and service personnel who
have been trained on this machine.
Special measures for re-commissioning after storage/standstill
Storage period/
standstill period
longer than
Measure
3 months
➤ Manually fill the airend with cooling oil.
12 months
➤ Change the oil filter.
➤ Change the oil separator cartridge.
➤ Change the cooling oil.
➤ Manually fill the airend with cooling oil.
36 months
➤ Have the overall technical condition checked by an authorised
KAESER SERVICE technician.
Tab. 41 Re-commissioning after storage/standstill
7.3 Checking installation and operating conditions
➤ Check and confirm all the items in the checklist before commissioning the machine.
To be checked
See
chapter
Confirmed?
➤ Are the operators fully conversant with safety regulations?
–
➤ Have all the positioning conditions been fulfilled?
➤ Is a user's lockable power supply disconnecting device installed?
➤ Are the tolerance limits of the mains voltage (power supply) within
the permissible tolerance limits of the rated voltage (machine)?
(see nameplate in the control cabinet)
➤ Are the power supply cable conductor cross-sections and fuse rat‐
ings adequate?
➤ Drive motor overload protection switch set according to the mains
voltage?
➤ Have all electrical connections been checked for tightness?
➤ Has the inspection been repeated after 50 operating hours following
the initial commissioning?
–
➤ Has the connection to the air system been made with a shut-off valve
and a flexible hose?
➤ Has the drive belt tension been checked?
➤ Is there sufficient cooling oil in the separator tank?
➤ Is there sufficient cooling oil in the airend?
7
Initial Start-up
7.2
Instructions to be observed before commissioning
901848 21 E
Operating Manual Rotary screw compressor
SK
43
Summary of Contents for SK 22
Page 2: ...Original instructions KKW SSK 2 21 en SBA SCHRAUBEN SC2IO KKW SSC 2 08 20180629 105600...
Page 6: ...Contents iv Operating Manual Rotary screw compressor SK 901848 21 E...
Page 8: ...List of Illustrations vi Operating Manual Rotary screw compressor SK 901848 21 E...
Page 10: ...List of Tables viii Operating Manual Rotary screw compressor SK 901848 21 E...