Kaden KSI Series, Installation Manual

Page: 10 / 44

10 | Kaden Installation Manual
5. Indoor unit installation
Installation instructions –
indoor unit
Prior to installation
Before installing the indoor unit, refer to the label on the
product box to make sure that the model number of the
indoor unit matches the model number of the outdoor unit.
Step 1: Select installation location
Before installing the indoor unit, you must choose an
appropriate location. The following are standards that will help
you choose an appropriate location for the unit.
Proper installation locations meet the
following standards:
✓ Good air circulation
✓ Convenient drainage
✓ Noise from the unit will not disturb other people
✓ Firm and solid — the location will not vibrate
✓ Strong enough to support the weight of the unit
✓ A location at least one meter from all other electrical
devices (e.g. TV, radio, computer)
DO NOT install unit in the following locations:
✕ Near an obstacle that will block air inlets and outlets.
✕ Near any obstacle that might block air circulation
✕ Near the doorway
✕ In a location subject to direct sunlight
Note about wall hole
While choosing a location, be aware that you should
leave ample room for a wall hole (see drill wall hole for
connective piping step) for the signal and power cable
and refrigerant piping that connect the indoor and outdoor
units. The default position for all piping is the right side of
the indoor unit (while facing the unit).
However, the unit can accommodate piping to both the left
and right.