Kaden Installation Manual |
19
6. Outdoor unit installation
Installation instructions –
outdoor unit
Step 1: Select installation location
Before installing the outdoor unit, you must choose an
appropriate location. The following are standards that will help
you choose an appropriate location for the unit.
Proper installation locations meet the following standards:
✓
Meets all spatial requirements shown in installation space
requirements above.
✓
Good air circulation and ventilation.
✓
Firm and solid – the location can support the unit and will
not vibrate.
✓
Noise from the unit will not disturb others.
✓
Protected from prolonged periods of direct sunlight or rain.
✓
Where snowfall is anticipated, raise the unit above the base
pad to prevent ice build-up and coil damage. Mount the
unit high enough to be above the average accumulated
area snowfall. The minimum height must be 46cm.
DO NOT install unit in the following locations:
✕
Near an obstacle that will block air inlets and outlets.
✕
Near a public street, crowded areas, or where noise from
the unit will disturb others.
✕
Near animals or plants that will be harmed by hot
air discharge.
✕
Near any source of combustible gas.
✕
In a location that is exposed to large amounts of dust.
✕
In a location exposed to a excessive amounts of salty air.
Special considerations
for extreme weather
If the unit is exposed to heavy wind:
Install unit so that air outlet fan is at a 90° angle to the
direction of the prevailing wind. If needed, build a barrier in
front of the unit to protect it from extremely heavy winds.
See figures below.
If the unit is frequently exposed to heavy rain or snow:
Build a shelter above the unit to protect it from the rain or
snow. Be careful not to obstruct air flow around the unit.
60cm
above
20cm from
back wall
30cm
on left
60cm
on right
100cm
in front
Strong
wind
Strong
wind
Strong
wind
Summary of Contents for KSI Series
Page 44: ...kadenair com au...
