ENG
ENG-21
accessory is intended to reduce the introduction of wind from chin area while riding. It
How to remove Wind Shutter-2
Firmly hold the interlining area around
the centre of the Wind Shutter-2 and pull
it up. Then the Wind Shutter-2 will be
removed.
CAUTION
13
Remove/Replace Breath Guard
The "Breath Guard" can be detached or
attached according to your needs.
DETACHING:
Grip the Breath Guard securely, and pull
it out to remove it.
ATTACHING:
As shown in the figure, set the centre of
the Breath Guard onto the centre of the
helmet, and push in the Breath Guard
between the shield rubber trim and the
chin liner.
Chin liner
Breath Guard
Centre of helmet
Breath Guard
CAUTION
2 1
Hold the interlining
around the centre
and pull it up.
Wind Shutter-2
Wind Shutter-2
Insert
in-between
Shield frame
rubber
Shield rubber
trim
How to remove Wind Shutter
Firmly hold the interlining area around the
centre of the Wind Shutter and pull it up. Then
the Wind Shutter will be removed.
Hold the interlining
around the centre
and pull it up.
To remove the Wind Shutter, gently pull up
and take off carefully. Otherwise the cloth
and/or part may be damaged.
Do not use an adhesive agent but follow
the procedure given above to attach the
Breath Guard.
Some components of an adhesive agent
may damage the material of the helmet.
Breath Guard
Shield rubber
trim
Breath Guard
Shield rubber
trim
Centre of the helmet
Chin liner
Insert
in-between
NOTE
Breath Guard Pro
(Optional accessory)
In addition to this standard Breath Guard, Breath Guard Pro, a larger size than Breath
Guard is available as an optional accessory. Breath Guard Pro is available at authorized
dealers of KABUTO helmets.
DETACHING:
Grip the Breath Guard securely,
and pull it out to remove it.
ATTACHING:
Breath Guard onto the centre of the helmet,
and push in the Breath Guard between the
shield rubber trim and the chin liner.
The “Breath Guard” can be detached or
attached according to your needs.
Summary of Contents for Japan FF-5V
Page 27: ......
