Kabuto Japan FF-5V, Instruction Manual

Page: 16 / 27

ENG
ENG-14
Fig. 3
Fig. 4
9
Remove/Replace of Cheek Pads
Cheek pad
Snap
cheek pad
Front
Joint Hook
*Pull the Front Joint Hook to the direction of the arrow.
*Grab the base of the snaps firmly.
Removing the cheek pad:
a
b
c
d
e
Rear joint hook
Undoing the Rear Joint Hook
Attached status
Rear joint hook
Joint bar
Back of the helmet
Fig. 1
Fig. 2
1 4
Pull the middle of
the cheek pad
toward you.
Pull it to the direction
of the arrow.
Pull it to the direction
of the arrow.
b b
Joint bar
(between the shell
and the liner)
Snaps
and
hook-and loop
fasteners
First, undo the 2 snaps at the
rear side of the cheek pad.
Pull the chinstrap out from the
cheek pad. (Fig.1)
Grip the base of the middle of the
cheek pad securely, and pull it.
(Fig.2)
Pull out the front Joint Hook at
the front of the cheek pad to the
direction of the arrow as shown
in theFig.3.
Pull out the rear Joint Hook by
turning it around the Joint Bar as
shown in Fig.4.
Refer to “Undoing the Rear
Joint Hook, below.
Repeat the above steps on the
other side.
Remove/Replace Cheek Pads
Cheek pad
Snap
Snaps and
hook-and loop
fasteners
Cheek pad
Back of the helmet
Joint bar
(between the shell
and the liner)
Rear joint hook
Undoing the Rear Joint Hook
Attached status
Turn it to the
direction of
the arrow.
Turn it to the
direction of
the arrow.
Pull it to the direction
of the arrow.
*Pull the Front Joint Hook to the direction of the arrow
CAUTION
When removing the cheek
pads, be sure to grip the
base of cheek pads where
the snaps are attached.
Otherwise, the cheek
pads may be damaged.
Pull the middle
of the cheek pad
toward you.
Fig.1
Fig.2
Fig.3
Fig.4
a