Kabola HR Series, User Manual

Page: 4 / 27

~ 4 ~
1 Introduction
1.1 General
This user manual is intended for both the installer and the end user of the Kabola HR or HRE heating
boiler. There is a wide range of HR/ HRE heating boilers with a broad range of applications. With this
purchase you obtain a product of the highest quality due to the practical application of the latest
European standards and directives and modern technologies. Kabola Heating Systems BV has been
developing and producing heating systems in the Netherlands since 1947.
Use the manual for both installation and while maintaining and replenishing your heating system. Save
the manual carefully for future use. You can obtain a digital copy at any time by mailing
info@kabola.nl
or by downloading from the website www.kabola.nl .
1.2 Area of application
The HR and HRE central heating boilers are intended to supply heat to heat up water (or coolant) in a
central heating system and/or in combination with the Kabola hot air system.
The HR CALORIFIER boiler with calorifier control is intended to heat both the heating system and hot
water using a boiler vessel.
The HR COMBI boiler is intended to heat the heating system and hot tap water without a boiler vessel.
The boilers are not intended to directly heat the space in which they are installed. Heating only takes
place using radiators, a hot air system, underfloor heating and/or any custom-made airco systems in
which the Kabola boiler is integrated. When using the boilers, account must be taken of the
dimensions of the spaces to be heated.
So always carry out a capacity calculation beforehand or take in advice.
1.3 Description of the boilers
The Kabola boiler heats the boiler water by means of an oil burner assembled on the boiler. The boilers
are supplied as standard as a 230 V design (also see the technical specifications in annex A).
Domestic fuel oil 1, domestic fuel oil 2, diesel or gas oil must be used as fuel. Should you want to use
biofuels or mixtures ask for additional advice. These fuels are being developed at speed and have
advantages and disadvantages with which account must be taken.
1.4 Technical specifications
You can find the most important specifications on the type plate attached to the right-hand side of the
boiler. The address of the manufacturer is also mentioned here. You can find the full technical
specifications in the back of this manual.
1.5 Guarantee provisions
We refer you to the guarantee certificate for the guarantee provisions. It is very important that the boiler
is brought into use after installation, and that the commissioning protocol (for bringing into use) is returned
to Kabola Heating Systems BV in Vianen
. You are then covered by the guarantee.