PCIe/PXIe-5211 |
| 57
4.6 Start Trigger
For all counter measurement and generation applications, the task starts running
when the start trigger happens.
Start trigger has the following types:
Immediately
The task will start immediately after JY5211xxTask.Start() is called.
Software
After calling JY5211xxTask.Start () on the software, the task will not start until a
software trigger is received.
Digital
An external digital trigger is generated when the external trigger source terminal
detects a rising edge as shown in Figure 52.
Figure 52 Rising Edge Digital Trigger
4.7 Logic Level
PCIe/PXIe-5211 module supports multiple logic levels as follows: 1.8 V
,
2.5 V, 3.3 V
and 5 V.
To change the logic level by the following properties:
1. Set property Device.LogicLevel to target logic level.
Call method Device.Commit() to activate the configuration.
Note:
Logic Level configuration will be applied to all PFIs
Summary of Contents for PCIe-5211
