PCIe/PXIe-5211 |
| 52
Timebase
By default, the counter uses the onboard 200MHz timebase to generate pulses. Use
the property JY5211COTask.Timebase to configure the timebase.
Please refer to chapter 4.5.3 for more information about timebase.
Terminals
To change the terminal of signals instead of using its default value as shown in
chapter 2.6, using following properties:
JY5211COTask.OutputTerminal – Signal output terminal.
Learn by Examples
Single Mode
Open
Counter Output-->Winform CO Single
and click
Start
and set the numbers
as follow:
Figure 49 CO In Single Mode
Summary of Contents for PCIe-5211
