PCIe/PXIe-5211 |
| 22
4.3.2 Pulse Measurement
The counter measures the high-level and low-level duration of a pulse on a signal.
Default, the input signal must be connected to Counter Gate terminal.
Set JY5211CITask.Type to CIType.Pulse to use this function.
Timing
1) Single Mode
The counting value of the duration of the high-level or low-level is written to the
register on each rising or falling edge of the pulse to measure, as shown in Figure 14.
Figure 14 Pulse Measurement in Single Mode
To configure the counter to work in this mode, set JY5211CITask.Mode to
CIMode.Single.
2) Finite/Continuous Mode with Explicit Sample Clock
The counting value of the duration of the high-level or low-level is stored into the
buffer on each rising edge of the sample clock, as shown in Figure 15.
Summary of Contents for PCIe-5211
