JW Fishers SSS-100K PC Page 66 Operation And Maintenance Manual Download

Page: 66 / 74

Actions:

Center –

Centers the Coverage map

on the current boat position.

Zoom In –

Increases the current zoom

level

Zoom Out –

Increases the current

zoom level.

Manage Waypoints and Markers –

Opens a control that allows the

Select which Waypoints and
Markers to display on the Map and
edit existing Waypoints and Markers.

Add New Marker –

New window is

displayed for making a new Marker (see page 64)

Add New Waypoint –

New window is displayed for making a new

Waypoint (see page 64)

Reset Sonar Coverage Map –

Clears all previous sonar coverage information from the Map.

Tools:

There are variety of tools available to assist in navigation and scanning targets

Range and Bearing to Target –

This tool window shows the op-

erator the range and bearing to a target. Selecting targets is ac-
complished by simply clicking on a navigational aid marker.

Measurement Tool –

This tool allows the operator to measure

distances on the coverage map. To measure a distance:

1. Click on the Measure Distance button ( )

2. Move the cursor to the starting point of the distance you

want to measure.

3. Press and hold the left mouse button
4. Drag the cursor to the end point of the distance

you want to measure.

5. Release the left mouse button
6. The distance is displayed in the box next to the

Measure Distance button.

Summary of Contents for SSS-100K PC











































































Search results

Summary of Contents for SSS-100K PC

Reviews:

Related manuals for SSS-100K PC

Brands by name

Popular brands

JW Fishers SSS-100K PC, Operation And Maintenance Manual

Search results

Summary of Contents for SSS-100K PC

Reviews:

Related manuals for SSS-100K PC

Brands by name

Popular brands