manualshive.com logo in svg

JW Fishers SSS-100K PC, Operation And Maintenance Manual

Share
Download
JW Fishers SSS-100K PC Operation And Maintenance Manual Download Page 17

17

All of the targets shown above will be picked up and displayed as shown below.  Drawing assumes targets are
in a straight line (water column factor not included - covered later).

The transducers horizontal beam is 1 degree wide.

To insure complete bottom coverage, out away from the fish,  the vertical part of the narrow beam must be very
wide. The vertical part of the  beam is 40 deg wide. The transducer is tilted (pointed) 10 deg down to insure that
the main impact of the beam will sweep across the bottom. The main power of the beam is in the dark shaded
area. The lightly shaded area shows the secondary area of the beam. It lacks the power of the main part of the
beam, but is part of the overall vertical beam pattern and does detect targets.

T 

R 

A 

N 

S 

D 

U 

C 

E 

R

Right Main Beam (horizontal/top view)

4800 fps

Fish 

Tail

Target #1

Target #3

Target #2

Main Beam

Total
Beam

Print Head - Right Channel

Target #2

Target #3

Target #1

Right Channel Display

Summary of Contents for SSS-100K PC











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands