JW Fishers SSS-100K PC Page 46 Operation And Maintenance Manual Download

Page: 46 / 74

SONAR VIEW SOFTWARE INSTALLATION FOR PLAYBACK ONLY

Use this install to put

SONAR VIEW

on computers that will only be used to playback previously

recorded files.

1. Start PC

2. Insert

SONAR VIEW

Installation CD into CD or DVD drive.

3. The

SONAR VIEW

Installation program should auto-run. If it does not, skip to step 5.

4. Exit the

SONAR VIEW

Installation program without installing any software.

5. Open Windows Explorer from the Start / Programs menu or right click on the Start button and select Explore

from the menu.

6. Select Jwf –

SONAR VIEW

. Open the

SONAR VIEW

folder. Click on Setup. This will start the

SONAR VIEW

installation program.

7. The ‘Welcome to JW Fishers

SONAR VIEW

Setup Wizard’ box opens. Click ‘Next’ to continue.

8. The customer information box opens “Enter your name, organization, and the software serial number provided

by JW Fishers. Click ‘Next’.

9. The ‘Confirm Installation’ box opens. Click ‘Next’.

10. The “Select Installation Folder’ box opens. The default folder is C:\ Program Files\. This should only be changed

if either the Windows or Program Files folder is not located on the C:\ drive. Click ‘Next’.

11. The

SONAR VIEW

software installation will complete. Click ‘Close’ in the ‘Installation Complete’ box.

12. Remove the Installation CD from the drive now.

13.

SONAR VIEW

is now ready to run for playback only.

14. When running

SONAR VIEW

a warning will appear:

“A Required Interface board was not found, Recording has been disabled”.
Click ok to enter playback only mode.

Summary of Contents for SSS-100K PC











































































Search results

Summary of Contents for SSS-100K PC

Reviews:

Related manuals for SSS-100K PC

Brands by name

Popular brands

JW Fishers SSS-100K PC, Operation And Maintenance Manual

Search results

Summary of Contents for SSS-100K PC

Reviews:

Related manuals for SSS-100K PC

Brands by name

Popular brands