JVC XV-M50BK Service Manual Download Page 10

Page: 10 / 88

XV-M52SL/XV-M50BK

1-10

Disconnect the card wire from connector CN101 on
the traverse mechanism control board on the bottom
of the DVD changer mechanism assembly.

Remove the screw L attaching the traverse
mechanism control board. Release the three parts e,
f and g and remove the traverse mechanism control
board.

Prior to performing the following procedure, remove
the top cover and the DVD changer mechanism
assembly.

Removing the traverse mechanism
control board (See Fig.17)

The DVD tray can not be ejected when the traverse
mechanism is up.

When the DVD is set or the traverse
mechanism is up.

The motor pulley and the belt can be seen on the
front side of the changer. Turn the motor pulley
clockwise until the belt stops.

Pull the tray lock lever on the left side of the changer
and draw the DVD tray.

Draw the DVD tray 1 to 3 as above.

Bringing down the traverse mechanism
as shown in the Fig.20

<DVD changer mechanism assembly>

Ejecting the DVD (See Fig.18 and 19)

DVD traverse
mechanism control board

CN101

Part e

Part f

Part g

DVD changer mechanism assembly

Fig.17

Fig.18

Fig.19

Motor pulley

Belt

Draw the DVD tray.

Tray lock lever

Tray stopper

Traverse mechanism

As the motor pulley is
turned, the traverse
mechanism lowers.

Summary of Contents for XV-M50BK

























































































Search results

Summary of Contents for XV-M50BK

Reviews:

Related manuals for XV-M50BK

Brands by name

Popular brands

JVC XV-M50BK, Service Manual

Search results

Summary of Contents for XV-M50BK

Reviews:

Related manuals for XV-M50BK

Brands by name

Popular brands